U mnie test Netflixa po wifi 5GHz twierdzi, że prędkość łącza to ok 840 Mbps, więc wystarczy z dużą górką na wszystko
TCL Seria P60
- Thread starter cancel
- Rozpoczęty
- Status
U mnie test Netflixa po wifi 5GHz twierdzi, że prędkość łącza to ok 840 Mbps, więc wystarczy z dużą górką na wszystko
U mnie test Netflixa po wifi 5GHz twierdzi, że prędkość łącza to ok 840 Mbps, więc wystarczy z dużą górką na wszystko
Mi chodzi o kabel a nie wifi.
A po wifi 5g. Trochę dziwne stoję przy routerze z komórką i mam max 650mb. A komórka z tamtego roku więc powinna mieć lepsze parametry niż tv z 2016 czy 2017
andremales
New member
Hello, good afternoon.
On my TCL 65P6046 I change the latest firmware installed (v574) and I'm going back to v544, because it seems to me the best version on last months: too buggy the latest releases. I have only one issue: whenever I switched on the TV the notification about a new firmware appear, and the behaviour is the same even if I select the option "do not install e do not select autoupdate", it appears everytime I switched on.
Anybody knows how to remove that annoying reminder ?
Thanks.
On my TCL 65P6046 I change the latest firmware installed (v574) and I'm going back to v544, because it seems to me the best version on last months: too buggy the latest releases. I have only one issue: whenever I switched on the TV the notification about a new firmware appear, and the behaviour is the same even if I select the option "do not install e do not select autoupdate", it appears everytime I switched on.
Anybody knows how to remove that annoying reminder ?
Thanks.
ashcrimson
New member
Hello,
Sorry to write in English. I am having an issue with my P60 (v574)... I had to disconnect the TV from the internet last week. Since then, it has been restarting and turning on randomly. Is there a fix? Do I need to downgrade to v544?
Thanks in advance!
Sorry to write in English. I am having an issue with my P60 (v574)... I had to disconnect the TV from the internet last week. Since then, it has been restarting and turning on randomly. Is there a fix? Do I need to downgrade to v544?
Thanks in advance!
robetson007
New member
Moje mijające 4 lata z Thomson 55UD6406 mogę podsumować jednym zdaniem: Nigdy nie kupię TV z firmy TCL/Thomson. Mam aktualnie oprogramowanie v570 i na żadnym ( dokonywałem poprzednio wielu aktualizacji) nie działała aplikacja HBO GO ( komunikat o błędzie 5.1). Na kupionym za 113 pln. Tv stick z xiaomi hbo go chodzi od wyjęcia z pudełka. Tyle w temacie.
Mam podobne zdanie dlatego teraz będę kupował TV od Xiaomi
Wysłane z mojego SM-N9860 przy użyciu Tapatalka
robetson007
New member
Mógłbym prosić o wskazówkę co robię źle w temacie HBO GO ?
Ostatnia edycja:
HBO Go wymaga aktualizacji metodą boot upgrade ze starszych wersji.
Gdzieś na forum była podana zalecana v528, ale chyba późniejsze (w tym aktualna) powinny też pomóc.
Potem reset all i reset shop z menu serwisowego i na nowo wszystko skonfigurować od zera.
Gdzieś na forum była podana zalecana v528, ale chyba późniejsze (w tym aktualna) powinny też pomóc.
Potem reset all i reset shop z menu serwisowego i na nowo wszystko skonfigurować od zera.
Ostatnia edycja:
Hi, beg your pardon writing in English.
I have a thomson 65UC6406 (=TCL U65P6046) tv set. Main board died, power led do light on, but thats all, does not turn on, no reaction to hw buttons or remote control.
So I aquired an used main board of the exact same type (08-MT58006-MA200AA) but recycled from 49UC6406. Result: display is a mess, wrong resolution, mirrored content etc. I thought the second board was faulty too, so I got a third one, again from a 49UC6406, but the same happened (screen issues). I managed to change in the factory settings the project code to 18 (=65UC6406) but this did not help either. I suspect there are different lcd matrix contollers in the 65" and 49" modells.
How can I update / configure the 49UC6406 mainboard to work with the 65UC6406? Many thanks for your help!
I have a thomson 65UC6406 (=TCL U65P6046) tv set. Main board died, power led do light on, but thats all, does not turn on, no reaction to hw buttons or remote control.
So I aquired an used main board of the exact same type (08-MT58006-MA200AA) but recycled from 49UC6406. Result: display is a mess, wrong resolution, mirrored content etc. I thought the second board was faulty too, so I got a third one, again from a 49UC6406, but the same happened (screen issues). I managed to change in the factory settings the project code to 18 (=65UC6406) but this did not help either. I suspect there are different lcd matrix contollers in the 65" and 49" modells.
How can I update / configure the 49UC6406 mainboard to work with the 65UC6406? Many thanks for your help!
Multiple project IDs for the same tv type!!!
Thanks for your quick response!
Meanwhile I found the solution)))
I searched this thread and found a guy who witnessed the reverse situation (65UC6406 board to 49UC6406 tv set), and he posted a screenshot with his project ID 067 of the 65UC6406 (and not 018!). I tried this ID and voila, it works
I discovered that there might be more than one Project IDs for the same singe TV set! Probably because the were manufactured with different LCD displays/controllers.
So in the situation just like me, I suggest you to scroll thru and try all the project ID options of your tv type in the factory menu! This would have save me ~60EUR if I discovered earlier...
Thanks for your quick response!
Meanwhile I found the solution
)))I searched this thread and found a guy who witnessed the reverse situation (65UC6406 board to 49UC6406 tv set), and he posted a screenshot with his project ID 067 of the 65UC6406 (and not 018!). I tried this ID and voila, it works
I discovered that there might be more than one Project IDs for the same singe TV set! Probably because the were manufactured with different LCD displays/controllers.
So in the situation just like me, I suggest you to scroll thru and try all the project ID options of your tv type in the factory menu! This would have save me ~60EUR if I discovered earlier...
- Status