Pit80 napisał:
Ja miałem identyczny problem po podłączeniu nboxa n-ki do Benqa.
Powyżej 576p obraz znikał. Później czary mary z Xboxem,to samo, brak obrazu.
Winny okazał się kabel. Zastąpiłem 15m krótszym, 10m i jest ok.
Tak więc długość odgrywa rolę i należałoby przy 15m zainwestować w naprawdę drogi model, mimo że to sygnał cyfrowy.
Więcej poczytasz w wątku o Benq W500.
Pozdrawiam
Sorry, sprostuję, bo masz rację. Im dłuższy kabel tym relatywnie powinna być wyższa jego jakość, tak przynajmniej wynika z wikipedii. Ja używam kabla hdmi ale z przejsciówką na dvi o długości 10 m i bez problemu wyciąga 1080p - a jego jakość jest pewnie adekwatna do ceny czyli znikoma.
The HDMI specification does not define a maximum cable length. As with all cables, signal
attenuation becomes too high at a certain length. Instead, HDMI specifies a minimum performance standard. Any cable meeting that specification is compliant. Different construction quality and materials will enable cables of different lengths. In addition, higher performance requirements must be met to support video formats with higher resolutions and/or frame rates than the standard HDTV formats.
The signal attenuation and
intersymbol interference caused by the cables can be compensated by using Adaptive Equalization.
HDMI 1.3 defined two categories of cables: Category 1 (standard or HDTV) and Category 2 (high-speed or greater than HDTV) to reduce the confusion about which cables support which video formats. Using 28
AWG, a cable of about 5 metres (~16 ft) can be manufactured easily and inexpensively to Category 1 specifications. Higher-quality construction (24 AWG, tighter construction tolerances, etc.) can reach lengths of 12 to 15 metres (~39 to 49 ft). In addition, active cables (
fiber optic or dual
Cat-5 cables instead of standard copper) can be used to extend HDMI to 100 metres or more. Some companies also offer
amplifiers,
equalizers and
repeaters that can string several standard (non-active) HDMI cables together.