Witam w Nowym Roku,czy można podłączyć do amplitunera onkyo 606 głośniki 8ohm harman kardon hkts 16, w instrukcji amplitunera napisane jest tak, Rated Output Power
North American:
90 watts minimum continuous power per channel, 8 ohm
loads, 2 channels driven from 20Hz to 20kHz, with a
maximum total harmonic distortion of 0.08% (FTC)
105 watts minimum continuous power per channel, 8 ohm
loads, 2 channels driven at 1kHz, with a maximum total
harmonic distortion of 0.7% (FTC)
110 watts minimum continuous power per channel, 6 ohm
loads, 2 channels driven at 1kHz, with a maximum total
harmonic distortion of 0.1% (FTC)
European:
7 ch × 140 W at 6 ohms, 1kHz, 1 ch driven (IEC)
Asian and Oceanian:
7 ch × 175 W at 6 ohms, 1kHz, 1 ch driven (JEITA)
Dynamic Power 210 W (3Ω, Front)
180 W (4Ω, Front)
110 W (8Ω, Front)
THD (Total Harmonic
Distortion) 0.08% (Power Rated)
0.08% (20Hz to 20kHz Power Rated)
Damping Factor 60 (Front, 1kHz, 8Ω)
Input Sensitivity and
Impedance 200 mV/ 47 kΩ (LINE)
Output Level and
Impedance 200 mV/ 2.2 kΩ (REC OUT)
Frequency Response 5Hz–100kHz/ +1 dB–3 dB (direct mode)
Tone Control ±10 dB, 50Hz (BASS)
±10 dB, 20kHz (TREBLE)
Signal to Noise Ratio 106 dB (LINE, IHF-A)
Speaker Impedance
North American: 6Ω–16Ω
European: 4Ω–16Ω
Asian and Oceanian: 4Ω–16Ω
na tylnym panelu ampli jest napisane : "caution: 4ohm-6ohm or 6ohm-16ohm see instruction manual for corrects settings"
North American:
90 watts minimum continuous power per channel, 8 ohm
loads, 2 channels driven from 20Hz to 20kHz, with a
maximum total harmonic distortion of 0.08% (FTC)
105 watts minimum continuous power per channel, 8 ohm
loads, 2 channels driven at 1kHz, with a maximum total
harmonic distortion of 0.7% (FTC)
110 watts minimum continuous power per channel, 6 ohm
loads, 2 channels driven at 1kHz, with a maximum total
harmonic distortion of 0.1% (FTC)
European:
7 ch × 140 W at 6 ohms, 1kHz, 1 ch driven (IEC)
Asian and Oceanian:
7 ch × 175 W at 6 ohms, 1kHz, 1 ch driven (JEITA)
Dynamic Power 210 W (3Ω, Front)
180 W (4Ω, Front)
110 W (8Ω, Front)
THD (Total Harmonic
Distortion) 0.08% (Power Rated)
0.08% (20Hz to 20kHz Power Rated)
Damping Factor 60 (Front, 1kHz, 8Ω)
Input Sensitivity and
Impedance 200 mV/ 47 kΩ (LINE)
Output Level and
Impedance 200 mV/ 2.2 kΩ (REC OUT)
Frequency Response 5Hz–100kHz/ +1 dB–3 dB (direct mode)
Tone Control ±10 dB, 50Hz (BASS)
±10 dB, 20kHz (TREBLE)
Signal to Noise Ratio 106 dB (LINE, IHF-A)
Speaker Impedance
North American: 6Ω–16Ω
European: 4Ω–16Ω
Asian and Oceanian: 4Ω–16Ω
na tylnym panelu ampli jest napisane : "caution: 4ohm-6ohm or 6ohm-16ohm see instruction manual for corrects settings"
